aluminum alloy

铝合金

双语例句

Built two product lines of metal powder and aluminum alloy additive 、 metal additive, grain refiner. 建立了金属粉末和铝熔铸业用熔剂、金属添加剂、细化剂两套生产线。

Valve body and internal parts: anodized aluminum alloy, copper. 阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。

The dimensional change of2A12 aluminum alloy by microarc oxidation in silicate electrolyte has been investigated. 研究了2A12铝合金在硅酸盐电解液中微弧氧化的尺寸变化。

The relationship of the heat deformation processes of the antirust aluminum alloy LF6 and its microstructure were studied. 研究了防锈铝合金LF6热变形工艺对组织的影响。

Effect of ingot gas holes on the structure and performance of 4032 aluminum alloy 铸锭气孔对4032铝合金组织和性能的影响

This paper discussed the application of artificial neural network at the resistance spot welding of aluminum alloy. 针对铝合金的电阻点焊，研究了人工神经网络在点焊质量估测中的应用。

The effect of aging temperature and aging time to new-type heat-resisting aluminum alloy forging structure and properties are introduced. 通过对新型铝合金时效处理后的组织结构进行分析，研究了不同的时效温度和时间对该铝合金力学性能的影响。

The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated. 研究了铝合金消失模铸造过程中的涂料行为。

The effect of isothermal forging temperature on microstructure and mechanical properties of2B70 aluminum alloy was studied. 研究了不同等温锻造温度对2B70铝合金显微组织与力学性能的影响。

Successful development of the market's leading aluminum and aluminum alloy surface treatment technology. 成功的开发出了市场上领先的铝、铝合金的表面处理技术。

The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine. 在BCS-30D通用板材成形性试验机上，对铝合金薄板的杯突值进行了不同润滑条件的试验研究。

The effect of pulsed current and pulsed magnetic field on the solidification structures of LY12 aluminum alloy was studied. 在LY12铝合金凝固的过程中施加脉冲电流或脉冲磁场，研究脉冲电流或脉冲磁场对这种合金凝固组织的影响。

Resistance spot welding of aluminum alloy with great resistance medium; 介绍了在实验室中测大电阻的一种方法。

The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy. 对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。

Effects of Aging Temperature and Mg Content on the Microstructure and Corrosive Properties of a High-Mg Aluminum Alloy 时效温度和镁含量对高镁铝合金微观组织和腐蚀性能的影响

The effects of various process variables on the density of aluminum alloy castings have been investigated systematically. 系统研究了各工艺因素对干砂消失模铸铝件密度的影响。

Head and cap are machined from aluminum alloy. 头部和上限从铝合金加工。

The rear armrests and the rear backrest support are made in aluminum alloy. 后扶手和后靠背支架为铝合金制作。

The product quality carbon structural steel, zinc-plated aluminum alloy made from rare earth. 该产品采用优质碳素结构钢，表面镀稀土锌铝合金制造而成。

A new green sealing process of anodic oxide film of aluminum alloy was studied in this paper. 本文研究了一种铝合金阳极氧化膜新型的绿色封闭工艺。

A process of forming chemical conversion coatings on LY12 hard aluminum alloy in cerium salt solutions was advanced. 提出了一种铝合金铈盐化学转化成膜工艺。

The template body is made of aluminum alloy, steel or copper. 模板体由铝合金、钢、铜等金属之一种制成。

The influences of welding parameters on the weld appearance of friction stir welding of LY12 aluminum alloy were researched. 研究了搅拌摩擦焊工艺参数对LY12铝合金焊缝形貌的影响。

The reasons of porosities production and process instability in CO2 laser welding shipbuilding T-section aluminum alloy are also discussed. 同时，讨论了船用铝合金T型材CO2激光焊接过程中产生气孔和过程不稳定的原因。

Application: aluminum alloy, copper alloy, magnesium alloy. 适用：铝合金、铜合金、镁合金。

The microstructure evolutions during spray forming process for high magnesium aluminum alloy are investigated in this paper. 研究了高镁铝合金在喷射成形过程中显微组织的变化。

Good adhesion to steel, galvanized steel and aluminum alloy. 对钢铁、锌钢材及铝合金有良好的附着力。

CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design. 采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。

It is applicable to the various brazing between aluminum alloy and aluminum alloy, aluminum alloy and Stainless steels. 铝基钎料适用于铝合金、铝合金与不锈钢之间的钎焊。